Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mirror Adjustment Button Removal Instructions

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part: Push button

To remove the button for adjusting the external rear-view mirrors, you need to take off the door panel: therefore, search for the relevant fastening screws. Start by disconnecting the window switch panel, which also includes the internal handle cover. Then, remove the trim behind the opening handle and finally open the cap located at the back of the glove compartment. Unscrew all the screws, including those along the lower edge, release the clips along the edges, and remove the panel by disconnecting the connectors and the lock cable. At this point, you can disconnect the mirror adjustment button.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Rear Window Switch
Instructions for Removing the Rear Window Switch
Volkswagen Jetta (2010-2018 / MK 6, A6) The rear window switch is integrated into the inner trim of the rear handle. To remove the switch, you must detach the trim by prying along the edges…
Instructions for Removing Front Seat
Instructions for Removing Front Seat
Volkswagen Jetta (2005-2010 / MK 5, A5) The seats of the vehicle in question are equipped with an electric adjustment system: therefore, it is advisable that the battery is efficient to act…
Instructions for Removing Air Vents
Instructions for Removing Air Vents
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the air vents located in the centre of the dashboard, you must first remove the trim that surrounds the instrument cluster and integrates t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos