Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Air filter replacement for Volkswagen Polo.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo MK V, MK 5, Polo V, Polo 5, 6R - Years 2009-2017
Part: Air filter
Operation: Air filter replacement for Volkswagen Polo.

To keep the engine efficient and control consumption, it is necessary to periodically replace the air filter of the Volkswagen Polo. To do this, we open the hood of the engine compartment and grasp the plastic panel in the center of the engine by the sides, and by pulling firmly, we release it from the four locks that hold it in place. We turn it over and on the inside we will find the cover of the filter box, which we will open after unscrewing the eleven screws that hold it in place with the help of a cross-head screwdriver. Once the cover is open, we can remove the old filter and replace it with a new filtering element, taking care to place it in the correct position. We close the cover by fixing the screws and position the panel by locking it with a firm push.


Posted on 2 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - Where is the Volkswagen Polo air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos