Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disconnect the Horn Alarm on the Volkswagen Multivan

Model: Volkswagen Multivan T5, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

As shown in the video, disconnecting the alarm connected to the horn is a simple and quick operation. You will need two spanners: one 10 mm and one 13 mm. The alarm is located on the passenger side.

To access it, remove the seal and lift the cover where the wipers are anchored. Reach in to unscrew (using screwdrivers) the two bolts, and you're done.

Once you have removed the alarm unit, you will see a connector that you need to disconnect to deactivate the alarm. It will continue to make a loud noise until it runs out of battery.

To muffle the sound, wrap it in a cloth.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Disable the Alarm on a Volkswagen Multivan?
How to Disable the Alarm on a Volkswagen Multivan?
Volkswagen Multivan (2021-2026 / T7, MK 4) To disable the alarm on a Volkswagen Multivan, connect a diagnostic tool to the vehicle's OBD port. In this type of vehicle, the port can be found on…
How to Disable the Alarm on the Volkswagen Multivan T7?
How to Disable the Alarm on the Volkswagen Multivan T7?
Volkswagen Multivan (2021-2026 / T7, MK 4) The activation, as well as the deactivation, of the alarm installed in the Volkswagen Multivan T7 is done using the remote control, the classic metho…
How to deactivate and activate the alarm system of the Volkswagen Multivan
How to deactivate and activate the alarm system of the Volkswagen Multivan
Volkswagen Multivan (2015-2024 / T6) In this short guide, we will see the main instructions that will allow us to activate and deactivate the anti-theft system of the Volkswagen Multivan…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos