Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Where is the OBD port located in the 1999 Volkswagen Polo?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Dashboard
Operation: Where is the OBD port located in the 1999 Volkswagen Polo?

In this new guide, we will discover where the OBD port is located inside your Volkswagen Polo Mk3 (year 1999). The entire procedure takes only a few seconds to complete correctly. Let's find out how to do it. First, reach the driver's seat and make sure the car is turned off. Immediately after, locate the plastic panel located under the steering wheel and remove it, being careful not to damage it. Once you have done this, locate the OBD port you were looking for and you're done. Don't forget to reattach the previously removed protective panel.


Posted on 14 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What does the warning light with a yellow triangle on Volkswagen Polo mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos