Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed and Clean the Cooling System of the Volkswagen Lavida

Model: Volkswagen Lavida MK 2, Typ18 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Antifreeze coolant

See other generations:
Video tutorial

This guide explains how to bleed and clean the cooling system of the Volkswagen Lavida. First, open the hood of your car and start removing the front bumper by unscrewing all the mounting screws; then remove the radiator hose, allowing the fluid to drain into a container.

At this point, unscrew the radiator screws and disconnect the hoses, then clean them; reassemble the radiator and reconnect the hoses, topping off the antifreeze (suitable for your radiator).


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Volkswagen Lavida?
How to Replace the Radio in a Volkswagen Lavida?
Volkswagen Lavida (2008-2012 / MK 1, Typ18) To replace the radio in a Volkswagen Lavida, remove the trim on the dashboard that includes the glove compartment area. Once this trim is removed, yo…
How to Reset the Service Light in a Volkswagen E-Lavida?
How to Reset the Service Light in a Volkswagen E-Lavida?
Volkswagen Lavida (2018-2025 / MK 3, Typ0C) In this tutorial, you will see how to reset the service light in a Volkswagen E-Lavida, a very simple operation to perform only after completing all …
How to Replace the Headlight Bulbs in a Volkswagen Lavida?
How to Replace the Headlight Bulbs in a Volkswagen Lavida?
Volkswagen Lavida (2018-2025 / MK 3, Typ0C) As you can see in this tutorial, replacing the headlight bulbs in a Volkswagen Lavida is an extremely simple and quick task. As shown in the video, i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos