Do it yourself
| ||||
|
Volkswagen Up - Video tutorial
Model: Volkswagen Up
MK 1
- Years 2011-2024 Removing the rear seats in the Volkswagen Up is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, open the trunk door, then fold down both backrests, locate the two side pins and unhook them using a flat-tipped screwdriver. Then unscrew the bolt of the central bracket with a Torx T30 key, remove the seat by pulling it upwards and disconnect the various connectors. At this point, all that remains is to unscrew all the bolts indicated with an M10 key and remove the backrests.
Posted on 16 July 2023 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |