Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : Where is the OBD2 port of the Volkswagen Polo 2006 located?

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 4, MK 4, Polo IV, 9N, MK IV - Years 2001-2009
Part: Dashboard
Operation: Where is the OBD2 port of the Volkswagen Polo 2006 located?

The OBD2 port of your 2006 Volkswagen Polo is located inside the cabin, and thanks to the following dedicated guide, you will finally be able to find it without any difficulty. First of all, you need to park the car in a safe and flat place, then turn it off completely and remain in the driver's seat. At this point, shift your attention to the lower side of the dashboard and locate the OBD2 port you were looking for. It is easily identifiable due to its pink color. Finally, connect a diagnostic tool to it, if necessary, and you're done.


Posted on 24 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What does the warning light with a yellow triangle on Volkswagen Polo mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos