Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper from the Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Rear bumper

To remove the rear bumper from the Volkswagen Polo, loosen all the screws located at the bottom of the bumper, along with those inside the rear wheel arches. Once these screws are removed, open the tailgate and unscrew the knobs located inside the boot near the lights. These can then be extracted from their housing to access the screws underneath. After these screws are also loosened, detach the bumper and replace it with a new one.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Today's step-by-step instructions will show you how to remove and replace the rear bumper of the Volkswagen Polo. First, move to the rear of the vehi…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) If you decide to install a new rear bumper purchased from the aftermarket, it is advisable to perform a pre-assembly check before painting. The insta…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) In this brief and simple guide, you will see the main steps to install the rear camera on the Volkswagen Polo. First, open the boot lid and start rem…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos