Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the steering wheel airbag of the Volkswagen Polo.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo V, MK V, 6R, Polo 5, MK 5 - Years 2009-2017
Part: Airbags
Operation: How to replace the steering wheel airbag of the Volkswagen Polo.

In this short and simple guide, we will see how to disassemble and replace the airbag of the Volkswagen Polo steering wheel, following the instructions below. In this video, it is shown how to replace the airbag with the steering wheel removed; therefore, we will press and pry on the back of the steering wheel (on the two holes found laterally) to detach and remove the airbag from the steering wheel, as shown in the video. At this point, we disconnect the electrical connectors to remove and replace the airbag with the new one, reassembling the steering wheel if it was previously disassembled!


Posted on 12 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What kind of error can the airbag of the Volkswagen Polo give? Read Answer
    • Polo 2009-2017 - When does the airbag light turn on in the Volkswagen Polo? Read Answer
    • Polo 2001-2009 - Where is the Volkswagen Polo 9N airbag control unit located? Read Answer
    • Polo 2017-2025 - What to do if the airbag light comes on in the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - What does the "Airbag" light on a Volkswagen Polo mean? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos