Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to install tuning headlights on the Volkswagen Polo 6r version.

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: Headlight
Operation: How to install tuning headlights on the Volkswagen Polo 6r version.

Let's see how to install beautiful aftermarket headlights on a Volkswagen Polo 6r. These headlights are from VLand, and you can find them on any e-commerce platform. There are different types: the ones in the video cost 419.00 euros on Amazon (free delivery) and you can find them with the code B0869DTLRM. The installation is quite simple because you just need to connect the original cables to the control unit; the included kit was applied to the headlight and then to the original connector. At first, only the position lights did not turn on. Keep in mind that the headlights only turn on when the instrument panel is turned on.


Posted on 25 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How do you replace the front headlight of the Volkswagen Polo 8? Read Answer
    • Polo 2001-2009 - How much does the right headlight of a Volkswagen Polo cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos