Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Wing Mirror

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Side mirror

See other generations:
Video tutorial

To remove the external wing mirror, first remove the door panel: unscrew the screws around the edge of the panel, then take off the handle cover and unscrew the screws underneath; use a plastic lever to disengage the clips and complete the panel removal by disconnecting the connectors and the lock cable; at this point, remove the plastic cover around the mirror and unscrew the fixing screws, then disconnect the adjustment system connector to remove it from the door.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Removing External Rear-View Mirror
Removing External Rear-View Mirror
Volkswagen Jetta (2010-2018 / MK 6, A6) To remove the external rear-view mirror, you must first remove the door panel; start by unclipping the electric window switch panel and disconnecting…
How to disassemble the external rearview mirror in the Volkswagen Jetta?
How to disassemble the external rearview mirror in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial we can see how to disassemble the external rearview mirror in the Volkswagen Jetta, an extremely simple and quick operation. First o…
How to Replace the External Wing Mirror on a Volkswagen Jetta?
How to Replace the External Wing Mirror on a Volkswagen Jetta?
Volkswagen Jetta (1998-2005 / A4, MK 4) To replace the wing mirror on a Volkswagen Jetta, loosen all screws securing the door panel to its housing: these screws are located under the trim o…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos