|
Do it yourself
| |||
| ||||
Removing External Rear-View Mirror
Model: Volkswagen Jetta
MK 6, A6
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
To remove the external rear-view mirror, you must first remove the door panel; start by unclipping the electric window switch panel and disconnecting the connector; also unclip the trim on the panel just behind the opening handle and then the plastic cover just below the armrest handle; at this point, you can unscrew the fixing screws of the panel and unclip the pressure clips along the edges to remove the panel itself, disconnecting both the connectors and the lock cable; finally, disconnect the adjustment system connector, remove the plastic cover applied directly at the rear-view mirror location, and unscrew the fixing screw to complete the removal; during reassembly, it is recommended to remove the rubber grommet from the plastic cover and insert it into the respective hole in the body.
Updated on 19 February 2026 by ScegliAuto
Related tutorials
Volkswagen Jetta
(2005-2010 /
MK 5, A5)
To remove the external wing mirror, first remove the door panel: unscrew the screws around the edge of the panel, then take off the handle cover and …
Volkswagen Jetta
(2010-2018 /
MK 6, A6)
.. we can see how to disassemble the external rearview mirror in the Volkswagen Jetta, an extremely simple and quick operation. First of all, we open the.. …
Volkswagen Jetta
(1998-2005 /
A4, MK 4)
To replace the wing mirror on a Volkswagen Jetta, loosen all screws securing the door panel to its housing: these screws are located under the trim o…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 3.371
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
