Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Headlight Bulb, Brake Light, and Indicator Replacement

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

To replace the bulbs of the rear lights, you need to dismantle the entire light assembly. The screw is accessible on the side of the boot after removing the large plastic cover by prying it with a plastic tool in the designated slot.

Unscrew the retaining knob screw of the headlight located under the cover and remove the light unit by disconnecting the connectors. Carefully remove the bulb holder and replace the faulty bulb by pressing it slightly and turning it anti-clockwise until it releases.

Refit the new bulb using one with the same specifications. Reposition the light assembly in its housing by connecting the respective connector.

Carefully tighten the fixing screw and close the plastic cover.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Fog Light on VW New Beetle
Replacing the Fog Light on VW New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) How to remove the bulb from the fog light on a VW New Beetle? Let's see how to take out the bulb from the front fog light. Remove the plastic cover a…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To access the cabin filter, you essentially need to dismantle part of the dashboard; the only tool required is a Torx key size 20. First, remove the …
How to Install the Hood Lining on a Volkswagen New Beetle?
How to Install the Hood Lining on a Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To install the hood lining on a Volkswagen New Beetle, first lower the hood completely so that the lining can be inserted from one side and then the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos