Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

To replace the bulb of the left front headlamp (driver's side), there is not much room to manoeuvre as the engine air filter housing is located behind the headlamp; however, you can proceed without dismantling anything. First, release the plastic cap protecting the bulb holder by turning it anti-clockwise, and similarly detach the bulb holder from which you will extract the old bulb to insert the new one. Then reattach both the bulb holder and the corresponding cap. The other protective cap is a rubber grommet, which can be removed by simply pulling it off. Next, release the bulb retaining spring to extract the bulb from its housing for replacement.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Front Headlamp Bulb Replacement
Front Headlamp Bulb Replacement
Volkswagen Jetta (2005-2010 / MK 5, A5) The bulb replacement can be carried out without removing the headlamp as there is sufficient space to access the bulb holder. Once the front bonnet i…
How to Replace the Headlamp Bulb of the Volkswagen Jetta?
How to Replace the Headlamp Bulb of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the headlamp bulb of the Volkswagen Jetta, open the bonnet to access the components at the rear of the corresponding headlamp. Disconnect …
Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Volkswagen Jetta (2005-2010 / MK 5, A5) Open the front bonnet and remove the protective cap from the bulb holder; detach the bulb holder complete with bulb (just pull it back), extract the …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos