Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years 2010-2018
Part:

In this tutorial, you will see how to reset the tyre pressure light on a Volkswagen Jetta, a very simple and quick operation to perform only after restoring the correct tyre pressure according to the instructions in the manual. First, enter the cabin, insert the key, and turn on the instrument cluster. Next, open the passenger glove compartment, locate the button depicting the warning light in question, and hold it down until the light disappears from the dashboard. Finally, restart the vehicle.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Volkswagen Jetta?
How to Reset the Tyre Pressure Warning Light on the Volkswagen Jetta?
Volkswagen Jetta (2018-2025 / A7, MK 7) To reset the tyre pressure warning light on the Volkswagen Jetta, turn on the ignition to access the menu displayed in the centre of the dashboard. S…
How to Reset the Tyre Pressure Warning Light on a Volkswagen Jetta?
How to Reset the Tyre Pressure Warning Light on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) The procedure to reset the tyre pressure warning light on a Volkswagen Jetta involves first inflating the tyres to the recommended pressure: this val…
How to reset the tire pressure sensor of a Volkswagen Jetta?
How to reset the tire pressure sensor of a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To reset the tire pressure light on a Volkswagen Jetta, start by checking the pressure of all the tires and make sure they are properly inflated acco…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos