Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Volkswagen Passat CC 2.0 TDI

Model: Volkswagen Passat Cc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

Video tutorial

Today's instructions will show you how to remove and replace the timing belt on a Volkswagen Passat CC 2.0 TDI. First, open the bonnet of the vehicle and start by removing the engine cover; then, remove the engine mount and take off the plastic timing cover by unscrewing the side screws, as shown in the video.

At this point, take the necessary references for replacing the timing belt, which will be useful for the subsequent timing of the engine; install the original belt to ensure reliability over time.


Updated on 9 September 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Volkswagen Passat CC
How to Replace the Headlight Bulb on a Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Before starting, open the front bonnet of your Volkswagen Passat CC. Begin by unclipping and removing the rear cover of the blown bulb. Next, disconn…
How to remove the central dashboard cover of the Volkswagen Passat CC
How to remove the central dashboard cover of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) In this brief guide, you will find instructions to remove and replace the trim or central cover of the dashboard in a Volkswagen Passat CC in simple …
How to Remove the Roof Lining of the Volkswagen Passat CC
How to Remove the Roof Lining of the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) The instructions in this guide will show you how to remove and replace the roof lining of the Volkswagen Passat CC. First, get inside the cabin and s…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos