Do it yourself
Frequently asked questions about cars and motorcycles

Car Air Conditioning Recharge

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Air conditioning

See other generations:
Video tutorial

You can no longer do without it, and anyone who owns a car should check the functionality of the essential air conditioning system, especially at the start of the season. Keeping the system efficient not only ensures physical comfort but also economic benefits, as using air conditioning increases fuel consumption at the same speed due to the energy required to operate the compressor.

It is necessary to evacuate the system using a vacuum pump to completely eliminate the presence of air and, especially, moisture inside the pipe. At this point, after opening the valve on the connector, you can insert the refrigerant and tighten the pipe once you hear it coming out.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2005-2010 / MK 5, A5) It often happens that your air conditioning no longer cools; here’s how to recharge the air conditioning gas on a Volkswagen Jetta. Open and lift the…
Volkswagen Jetta (2010-2018 / MK 6, A6) Today's information will help you correctly use the air conditioning in the Volkswagen Jetta. First, start the vehicle's engine and press the A/C but…
Volkswagen Jetta (1998-2005 / A4, MK 4) This guide provides instructions on how to remove and replace the air conditioning compressor of the Volkswagen Jetta, as well as the Golf. First, op…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos