Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Volkswagen Touareg?

Model: Volkswagen Touareg MK 1, 7L - Years 2002-2010
Part: Battery

To replace the battery in the Volkswagen Touareg, loosen the screws that secure the driver's seat: these screws are located at the front and rear of the seat's sliding rails. This will allow you to lift the seat and the carpet underneath it: beneath the carpet, you will find the car battery, which needs to be disconnected from the power cables and released from the securing screws. This will enable you to remove the device from its housing and replace it with a new one.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in the 2020 Volkswagen Touareg?
How to Replace the Key Battery in the 2020 Volkswagen Touareg?
Volkswagen Touareg (2018-2026 / MK 3, CR) This video shows how to replace the battery in a remote key for the 2020 Volkswagen Touareg. The same procedure can be used for other keys from the V…
How to Change the Key Battery of a VW Touareg
How to Change the Key Battery of a VW Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) Replace the flat battery inside the remote control of a Volkswagen Touareg. Take the car remote, press the button on the back; lever out the side bat…
How to Replace the Battery in a Volkswagen Touareg?
How to Replace the Battery in a Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the battery in a Volkswagen Touareg, loosen the screws securing the front and rear lower seat, disconnect the connectors, and remove the s…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos