Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Pump

See other generations:
Video tutorial

In this tutorial, you will see how to replace the windscreen washer pump on a Volkswagen Golf, a very simple and quick operation. First, lift the front left side of the vehicle, then remove the wheel and, using a Torx spanner, take off the lower inner wheel arch cover.

Next, disconnect both hoses by releasing the respective clips and the power connector, then grasp the pump and separate it from the reservoir. At this point, simply insert the replacement, reassemble everything, and refill the lost fluid during the operation.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Removing Windscreen Washer Pump from Volkswagen Golf 5
Removing Windscreen Washer Pump from Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) How to remove the windscreen washer pump? Let's see how to disassemble the pump from inside the front bumper. Remove the right front wheel, start by …
How do you replace the windshield washer pump of the Volkswagen Golf?
How do you replace the windshield washer pump of the Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In order to replace the windshield washer pump of the Volkswagen Golf, you need to loosen the screws that fasten the front bumper to its housing, so …
Removing the Windscreen Washer Pump from Volkswagen Golf 5
Removing the Windscreen Washer Pump from Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video, you will see how to remove the windscreen washer pump from a Volkswagen Golf fifth series. First, unscrew the screws found on the lowe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos