Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the fuel cap of the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuel cap

See other generations:
Video tutorial

If the fuel cap maintains a proper seal, it should be replaced with a new unit that includes the rubber cover and flap. To do this, open the flap and use an Allen key to unscrew the screw on the left near the spring pin, unscrew the cap, and with your hands, apply pressure on the left side to detach the rubber frame.

Once detached, free the rubber cover from the neck by turning it left again to remove the entire assembly, including the drain tube. Install the new unit: first, insert the tube, then starting from the right, fit it into its seat, ensure the rubber adheres to the neck, and finally tighten the locking screw.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

Replacing the Reverse Light Bulb on a Volkswagen Polo
Replacing the Reverse Light Bulb on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) When you notice that a reverse light bulb on your Volkswagen Polo has blown, you must replace it as soon as possible for safety reasons. To do this, …
How do you replace the fuel door of the Volkswagen Polo?
How do you replace the fuel door of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the fuel door of the Volkswagen Polo, you will first need to open it to access its internal part: here you will find the access cap to the…
How to open the fuel tank door of the Volkswagen Polo
How to open the fuel tank door of the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Below we will see the instructions that will allow us to open the fuel tank flap of the Volkswagen Polo, in simple steps. First of all, we get on boa…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos