Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil Filter on a VW Golf

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Oil filter

See other generations:
Video tutorial

Lift your car and place it on suitable axle stands for easier access. Now remove the oil filter located at the bottom of the engine.

Before fully removing it, prepare a container to catch the oil that will spill from that area. Now screw on the new filter.

Next, you need to remove the sump plug to drain all the used oil circulating in your engine, so have a suitable container ready for this as well. Remember to replace the plug once finished.

Now, simply add the new oil to your engine's system, and you're done!


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Change Engine Oil and Filter on the Volkswagen Golf VII
How to Change Engine Oil and Filter on the Volkswagen Golf VII
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you will see how to change the engine oil and filter on the Volkswagen Golf VII. Open the bonnet and remove the oil filler cap, then l…
How to replace the oil filter and engine oil of the Volkswagen Golf 6
How to replace the oil filter and engine oil of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The oil change on a Volkswagen Golf model 6 can be done independently with a few simple steps. We open the front hood and unscrew the oil tank cap to…
How to replace the engine oil and oil filter of the Volkswagen Golf 2.0 TDI
How to replace the engine oil and oil filter of the Volkswagen Golf 2.0 TDI
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's information will show us how to perform the routine maintenance service, replacing the engine oil and oil filter, on a Volkswagen Golf 2.0 TD…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos