Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Wing on a Volkswagen Passat?

Model: Volkswagen Passat 3BG, B5 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the front wing on a Volkswagen Passat, open the bonnet to access the screws securing the wing from the top. Once these screws are loosened, proceed to unscrew those located inside the corresponding wheel arch. Finally, loosen the screws securing the wing at the front, right next to the bumper.

When these screws are loosened, you can detach the wing to fit the new one and check that everything works.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) To replace the wheel arch on a Volkswagen Passat B6, you need to lift the car with a jack and remove the bolts securing the wheel corresponding to th…
Volkswagen Passat (1996-2005 / 3BG, B5) Today, you will learn how to remove the front wing on a Volkswagen Passat B5 in simple steps. First, remove the screws located inside the wheel arch …
Volkswagen Passat (2005-2010 / B6, 3C) In today's video, you will see the main instructions for removing the wheel arch and front wing of a Volkswagen Passat B6. First, remove all the scre…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos