Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touran
    4. : How to remove the diesel pump on a Volkswagen Touran

Volkswagen Touran - Video tutorial

Model: Volkswagen Touran 1T, MK 1 - Years 2003-2015
Part: Fuel pump
Operation: How to remove the diesel pump on a Volkswagen Touran

Make sure the vehicle is turned off and the key is removed from the ignition. Disconnect the negative terminal of the battery to avoid short circuits. Lift the rear seats to access the compartment under the seat where the diesel pump is located. Remove the screws or bolts that secure the rear seat and lift the seat to expose the carpet. Lift the carpet to reveal the access panel to the diesel pump. Remove the bolts or screws that secure the access panel and lift it to expose the diesel pump. Disconnect the diesel pump: Disconnect the electrical connectors and fuel lines from the pump. Use a suitable tool to remove the cover or securing nut of the pump. Carefully extract the diesel pump from the tank. If you are installing a new pump, make sure it is compatible with your Touran model. Install the new pump in the tank and reconnect the connectors and fuel lines. Make sure all gaskets are positioned correctly to avoid leaks. Reattach the access panel and secure it with bolts or screws. Reposition the carpet and reassemble the rear seat. Reconnect the battery.


Posted on 3 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Touran 2003-2015 - Where is the fuel pump of the Volkswagen Touran located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos