|
Do it yourself
| |||
| ||||
How to replace a fuse in the Volkswagen Golf 7
Model: Volkswagen Golf
MK 7, Golf 7, Golf VII
- Years 2012-2019
To replace a fuse in the Volkswagen Golf 7, we start by removing the side cover on the lower left of the dashboard to access the fuse box; once at the fuse box, we can remove the cover on the left end of the dashboard where it meets the door to have more light; once that cover is removed, we can locate the fuse of the non-functioning component, grip it with small pliers, pull it out and check if the bridge inside is broken, the fuse needs to be replaced, otherwise if the bridge is intact, the fuse is functioning; then we take a new fuse, of the same amperage and insert it in place of the non-functioning one; finally we can reassemble the covers.
Posted on 18 May 2024 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(1997-2003 /
MK 4, Golf IV, Golf 4)
The fuse related to the operation of the front fog light bulb of the Volkswagen Golf model 4 is located inside the box on the left side of the dashbo…
Volkswagen Golf
(1997-2003 /
MK 4, Golf IV, Golf 4)
The fuse related to the operation of the security alarm on a Volkswagen Golf MK 4 model vehicle is located inside the fuse box located on the lower l…
Volkswagen Golf
(1997-2003 /
MK 4, Golf IV, Golf 4)
Today we will explain how to replace the headlight fuse of the Volkswagen Golf 4. The fuse is located inside the box at the left end of the dashboard…
Other guides you may be interested in
|
Frequently Asked QuestionsInstallation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.119
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |