Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cabin air filter

See other generations:
Video tutorial

First, locate the filter in question; it is positioned behind the glove compartment in front of the front passenger side, then perform the same operations as shown in the video, that is, push the lever that locks the filter cover, then remove it, and by pulling down the exposed tab, you can extract the filter; pay attention to the direction in which it is installed, as you will need to position the new filter in the same direction as the old one was installed.

Now, simply retrace the steps in reverse for reassembling the various components.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on a VW Polo 4
How to Replace the Pollen Filter on a VW Polo 4
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To replace the cabin air filter or pollen filter on a Volkswagen Polo 4 model 9N, follow these steps: - Park the car on level ground; - Open the pass…
How to Replace the Cabin Air Filter on the Volkswagen Polo 6R
How to Replace the Cabin Air Filter on the Volkswagen Polo 6R
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To correctly replace the cabin air filter in your Volkswagen Polo 6R, you will need just a few minutes. With the following instructions, you will fin…
How to Replace the Cabin Filter on the Volkswagen Polo 5
How to Replace the Cabin Filter on the Volkswagen Polo 5
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) If you own a Volkswagen Polo fifth generation (2009-2017) and want to replace the old cabin air filter, simply follow these steps. Before starting, e…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos