Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on a Volkswagen Passat

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Light bulb

To make the job easier and less tiring, open the boot lid and hold it at half height to facilitate all the operations. After locating the light, proceed to remove the two screws that secure it. This way, you can replace the bulb and reposition the transparent plastic cover, including the new bulb now fitted at the back, in its original position and screw the screws back in to secure it. Now, test the new bulb.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Bulb on a Passat B6
How to Replace the Number Plate Bulb on a Passat B6
Volkswagen Passat (2005-2010 / B6, 3C) This video shows how to replace the number plate bulb on a Passat B6. It is a very simple operation that should take no more than five minutes. Open …
How to Replace the Number Plate Light Bulb on a Volkswagen Passat?
How to Replace the Number Plate Light Bulb on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) To replace the number plate light bulb on a Volkswagen Passat, use a tool to lever the light unit out of its housing. Once the light unit is removed,…
Replacing Number Plate Light Bulb on Passat
Replacing Number Plate Light Bulb on Passat
Volkswagen Passat (2010-2014 / B7) Remove the number plate light from the rear bumper of a Volkswagen Passat: use a screwdriver to lever at the side of the light. Once the light unit i…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos