Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to replace the key battery of a Vw Polo

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo III, Polo 3, MK III, 6N, MK 3 - Years 1994-2003
Part: Battery
Operation: How to replace the key battery of a Vw Polo

How do we change the battery in the remote control key of our Volkswagen Polo? Let's see how to do it in this detailed video. We take our remote control key, we go with the help of a screwdriver to pry between the two parts of the plastic key case. We pry until the cover opens. We extract the worn battery with a screwdriver, let's take a new one of the same size and voltage. We replace the lighting led as in the video if it is damaged. We reassemble the cover on our remote control by pressing on the key case until we hear the lock click. We check the exact functioning of the remote control key.


Posted on 3 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Polo 2001-2009 - How many amps is the battery of the Volkswagen Polo? Read Answer
    • Polo 2009-2017 - How many amps must the battery of a Polo 1.4 diesel with positive pole on the left be? Read Answer
    • Polo 2009-2017 - How many Ah must be the battery for the VW Polo1.2 petrol? Read Answer
    • Polo 2001-2009 - How many amps should the battery have for the VW Polo 1.4 petrol? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos