Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Volvo V40?

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Service warning light

To reset the "Service" light on a Volvo V40, turn on the instrument panel without starting the engine, making sure not to press the brake pedal. Use the buttons located on the turn signal lever, positioned on the left side of the steering wheel, to access the onboard computer menu. Navigate through the options displayed on the screen and find the section dedicated to maintenance or resetting service intervals. Once you have found the correct option, select it using the buttons on the turn signal lever and follow the on-screen instructions to confirm the operation. It may be necessary to hold down a button for a few seconds to complete the reset. When you are finished, turn off and on the instrument panel to verify that the "Service" light has been successfully reset. This procedure ensures that the system keeps accurate track of the maintenance performed.

Posted on 18 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) Good morning, today we are here to find out how to reset the "Service" light on our Volvo V40. Let's start by sitting in the driver's seat of the car…
How to reset the service in the Volvo V40?
How to reset the service in the Volvo V40?
Volvo V40 (1995-2012 / MK 1) In this tutorial, we can see how to reset the service in the Volvo V40, an extremely simple and quick operation. Before proceeding, we must have comp…
How to reset the tire pressure sensor of the Volvo V40
How to reset the tire pressure sensor of the Volvo V40
Volvo V40 (2012-2019 / MK 2) Today we will see the step-by-step instructions on how to reset the tire pressure warning light (TPMS) of the Volvo V40; before performing the reset,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos