Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service reminder of the Volvo XC90

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Service warning light

Below we will discover the information that will illustrate the procedure for resetting the service reminder of the Volvo XC90. First, we get on board the vehicle and start the instrument panel by pressing the button; then we press and hold the reset button found at the bottom of the steering wheel, holding it down until the service light flashes three times on the instrument panel display. At this point, we turn off the instrument panel and then start the engine, verifying the actual reset of the regular maintenance reminder.

Posted on 28 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Reset of the maintenance warning for the Volvo XC90.
Reset of the maintenance warning for the Volvo XC90.
Volvo Xc90 (2002-2014 / MK 1) The instructions outlined in this guide will allow us to reset the maintenance warning for the engine oil change of the Volvo XC90. First, let's get …
Resetting the Service Light on the Volvo XC90
Resetting the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) This guide will show you how to reset the service light for routine maintenance on the Volvo XC90. First, get inside the vehicle and turn on the igni…
Reset of the maintenance (service) indicator for the Volvo XC90.
Reset of the maintenance (service) indicator for the Volvo XC90.
Volvo Xc90 (2002-2014 / MK 1) Let's briefly go over the steps that will allow us to reset the regular maintenance (service) light on the Volvo XC90. First, let's get inside the ve…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos