Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Dashboard Centre Console

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Dashboard

See other generations:
Video tutorial

First, remove the glove compartment located just behind the gear lever, then unscrew the two fixing screws of the console located just below. Using a small flathead screwdriver (or a plastic trim tool), unclip the frame around the display and, pressing from the back, pull out the display itself.

Then unscrew the other two fixing screws of the console located behind the display just removed and unclip the central tunnel console by pulling it forward, taking care not to damage it. Proceed in reverse for reassembly.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to remove the cover of the central console of the Volvo S40
How to remove the cover of the central console of the Volvo S40
Volvo S40 (2004-2012 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the plastic partition of the central console of the Volvo S40. First…
Instructions for Disassembling the Car Radio
Instructions for Disassembling the Car Radio
Volvo S40 (2004-2012 / MK 2) Disassembling the standard car radio is straightforward but requires some caution when removing the plastic parts that are secured with clips: it is …
How to Remove the Centre Console of Volvo S and C Series
Volvo S40 (2004-2012 / MK 2) As shown in the video, the first step is to remove the trim using a plastic lever, doing this as gently as possible. Once the sides are removed, you …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos