Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo S60?

Model: Volvo S60 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The Service light displayed on the instrument cluster of the Volvo S60 can be cleared by turning on the ignition, ensuring that the T2 code along with its numerical value is shown on the display. Then, press the ignition button once without starting the engine, and then press and hold the OK button on the right side of the steering wheel.

At the same time, keep the ignition button pressed, and you can continue to hold these two buttons until a flashing 'i' appears on the display; at this point, you can release the buttons only when an audible signal indicates that the reset has occurred.


Posted on 23 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) To reset the service light on a Volvo S60, follow the steps shown in the video. First, turn on the ignition and repeatedly press the button next to t…
How to Reset the Service Light on a Volvo S60?
How to Reset the Service Light on a Volvo S60?
Volvo S60 (2010-2018 / MK 2) You can clear the Service light from the instrument cluster of the Volvo S60 by turning on the ignition and navigating through the menu using the lef…
How do you reset the Service light on the Volvo S60?
Volvo S60 (2010-2018 / MK 2) On the instrument panel of the Volvo S60, it will be possible to make the Service light disappear by turning on the instrument panel and navigating w…

Other guides you may be interested in

How to Replace the External Door Handle on a Renault Master

Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end!

Watch the video!


by ScegliAuto

More videos