Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter

Model: Volvo S80 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Air filter

See other generations:
Video tutorial

This short video shows how to replace the air filter in the engine bay of the 1999 Volvo S80 T6. First, after opening the bonnet, unclip and detach the plastic cover of the air filter box. Manually remove the old filter and, after inspecting it, take a new one and place it in the box. Now, replace the cover in its starting position and close it. As a final step, remember to reclip the closure clips.

The tutorial also reminds us that it is advisable to replace the air filter every 50,000 miles.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing ABS Control Unit
Instructions for Removing ABS Control Unit
Volvo S80 (1998-2006 / ) To access the ABS pump control unit, you need to remove the air filter housing. Disconnect the connector attached to the mass air flow sensor located…
Replace the Indicator Switch on the Volvo S80
Replace the Indicator Switch on the Volvo S80
Volvo S80 (2006-2016 / MK 2) In this video, follow the steps to remove and replace the lever or indicator switch (turn signal) on the Volvo S80. First, get inside the vehicle and…
How to Replace the Position Light Bulbs in a Volvo S80?
How to Replace the Position Light Bulbs in a Volvo S80?
Volvo S80 (2006-2016 / MK 2) This tutorial shows how to replace the position light bulbs in a Volvo S80, a very simple operation. First, ensure the key is not inserted, then open…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos