Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on a Volvo XC40

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Air filter

Lift the hood. Remove the small screws that secure the engine air filter box, as shown in the video (there should be seven), and set them aside without losing them. At this point, lift the cover of the filter box just enough (you don't need to remove it completely) to extract the filter itself. Insert the new filter you purchased, ensuring it has the same part number as the one removed. Install it in the correct orientation, although it is quite difficult to make a mistake with this model due to the shape of the compartment. Reinstall all the screws, and you're done. Good luck!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Volvo XC40
How to replace the cabin air filter of the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) If you don't know how to replace the cabin air filter in your Volvo XC40, don't worry because thanks to the steps described in our new guide, you wil…
Replacement of the diesel filter of the Volvo XC40 2.0 D4
Replacement of the diesel filter of the Volvo XC40 2.0 D4
Volvo Xc40 (2017-2026 / MK 1) Below we will see the main instructions on how to disassemble and replace the diesel filter of the Volvo XC40 2.0 D4. First, lift the vehicle and sta…
What is the Fuse Diagram for the Volvo XC40?
What is the Fuse Diagram for the Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) If a device in your Volvo XC40 suddenly stops working, the first thing to do is check the status of the respective fuses, which are indicated in this…

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos