Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling, Testing and Replacing the Light Switch

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Tail light bulb

Sometimes, bulbs stop working, but after replacement, they still do not light up. When this happens, it is natural for those less experienced to think that a fuse might be blown, so they check the fuse board for the problem. However, this is not always the case; sometimes the culprit is elsewhere: the light switch. Before confirming this diagnosis, it is advisable to test the light circuit by joining the two wires inside the connector using, for example, a paperclip: if they light up, the issue is indeed the switch. The removal process is very simple: you only need to remove the wheel, and you will find the connector near the driveshaft (driver's side). Once disconnected, get a 24mm spanner and remove it. At this point, check it again with a multimeter, holding it in hand: if you do not read any resistance value, you have solved the problem.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of Rear Headlight Lights on Volvo S40
Disassembly of Rear Headlight Lights on Volvo S40
Volvo S40 (2004-2012 / MK 2) Are the rear headlight bulbs damaged? Let's remove the bulbs from above inside the lights. Lift the boot lid, then remove the fabric/plastic cover lo…
Removal and Replacement of the Car Radio
Removal and Replacement of the Car Radio
Volvo S40 (1995-2004 / MK 1) To remove the car radio from the console, protect the gear knob with a cloth, then insert the appropriate tools or a coin into the side slots of the …
Replacing the Instrument Cluster Lights on Volvo S40
Replacing the Instrument Cluster Lights on Volvo S40
Volvo S40 (2004-2012 / MK 2) This tutorial begins with the instrument cluster already removed (if you don't know how to do this, many of our other tutorials cover this operation)…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos