Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : How to remove the cabin filter of a Volvo XC60

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Cabin air filter
Operation: How to remove the cabin filter of a Volvo XC60

Let's start by entering the passenger side of the passenger compartment. In the lower compartment where you normally put your feet, let's move the carpet slightly. By doing so we will already be able to see the passenger compartment filter. Let's proceed by disconnecting the plug connected to the control unit next to the filter, and then disconnect the control unit itself. Once this is done, we will proceed with unscrewing the upper wall of the compartment with a Torx screwdriver, and then disconnect the plug connected to it. Once the upper wall has been removed, we will be able to disassemble the passenger compartment air filter, simply by unhooking the clips that secure it, and then extract it from its housing. When we have completed this step, we will have successfully completed the disassembly.


Posted on 24 March 2024 by ScegliAuto



Volvo XC60 cabin air filter replacement
Volvo Xc60 (2008-2016 / MK 1) In today's video tutorial we will see how to quickly and easily remove and replace the cabin air filter in a Volvo XC60. First we must know that the
How to replace the Volvo XC60 diesel filter
Volvo Xc60 (2008-2016 / MK 1) In today's video we see how to replace the diesel filter in the first series of the Volvo XC60. First we need to lift the car onto the bridge. Now le
Where is the fuel filter located in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this video, we can see where the fuel filter is located in the Volvo XC60 and how to proceed in case we need to replace it, an operation that is e

    Frequently Asked Questions

    • Xc60 2008-2016 - Where is the Volvo XC60 cabin filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos