Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Extraction of the Car Radio

Model: Volvo S40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

First, put the gear lever in the position furthest from the dashboard to create maximum workspace. On either side of the car radio, there are two small panels for extraction.

Press each one and pull them outwards with both hands to extract the car radio from its housing. At this point, gently disconnect the various connectors, using the levers present on them when necessary.

To refit, ensure that the two levers used previously for extraction are positioned outwards. Introduce the car radio back into its housing and push the levers into their position.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Instructions for Disassembling the Car Radio
Instructions for Disassembling the Car Radio
Volvo S40 (2004-2012 / MK 2) Disassembling the standard car radio is straightforward but requires some caution when removing the plastic parts that are secured with clips: it is …
Removing the Car Radio for Repair
Removing the Car Radio for Repair
Volvo S40 (2004-2012 / MK 2) Using a plastic tool to avoid damaging the bodywork, pry at the sides of the display panel to release the plastic clips and remove it. Still using a …
Removal of the Car Radio and Climate Control Buttons
Removal of the Car Radio and Climate Control Buttons
Volvo S40 (1995-2004 / MK 1) Using a small flathead screwdriver, press and release the two securing clips of the car radio located at the bottom sides, then extract the car radio…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos