Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Coolant on a Volvo V40

Model: Volvo V40 MK 2 - Years 2012-2019
Part: Antifreeze coolant

Coolant is essential for the health of your engine, as it cools the engine to maintain the correct operating temperature and transfers heat to warm the vehicle's cabin. To top up the coolant on a second-generation Volvo V40, produced from 2012 to 2019, first open the bonnet. Inside the engine bay, located on your left, is the coolant reservoir. Simply unscrew the cap of the reservoir and add coolant directly from the opening. The coolant level should always be between the MIN and MAX marks, so regular checks are recommended.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Volvo V40?
How to Reset the Tyre Warning Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) In this tutorial, you will learn how to reset the tyre warning light on the Volvo V40, a very simple and quick operation to perform only after restor…
How to change oil and filter on a Volvo V40 D4
How to change oil and filter on a Volvo V40 D4
Volvo V40 (2012-2019 / MK 2) In this video, we will see how to change the oil and oil filter on a Volvo V40 D4. The first thing we need to do is remove the engine cover to open t…
How to reset the tyre warning light in the Volvo V40?
How to reset the tyre warning light in the Volvo V40?
Volvo V40 (2012-2019 / MK 2) This tutorial shows how to reset the tyre warning light in the Volvo V40, a very simple and quick operation, to be performed only after restoring the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos