Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Horn

Model: Volvo S40 MK 1 - Years 1995-2004
Part: Accessory kit

Replacing the horn is very simple to perform, thanks to its location: simply open the bonnet to see the two horns fixed at both ends of the grille; then disconnect the power connector from the horn to be replaced, unscrew the fixing bolt while holding the nut with another spanner, and remove the old horn; then fit the new one, secure it with the appropriate bolt, and reconnect the power connector; finally, perform a functionality check to ensure it works correctly (some horns have a sound adjustment screw).

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the air conditioning compressor of the Volvo S40
Replacement of the air conditioning compressor of the Volvo S40
Volvo S40 (2004-2012 / MK 2) These brief and simple instructions will allow us to dismantle and replace the air conditioning compressor of the Volvo S40. First, let's lift the ve…
Instructions for Replacing Cigarette Lighter
Instructions for Replacing Cigarette Lighter
Volvo S40 (1995-2004 / MK 1) The ashtray and cigarette lighter are located at the bottom of the centre console, just in front of the gear lever. Start by detaching and removing t…
Replacing the Interior Light Bulbs in the Volvo S40
Replacing the Interior Light Bulbs in the Volvo S40
Volvo S40 (2004-2012 / MK 2) Here are the instructions that will allow you to remove and replace the bulbs in the interior light of the Volvo S40. First, get inside the vehicle a…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos