Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Air Filter

Model: Volvo S80 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just below the glove compartment, above the scuff plate; to access the air duct, it is necessary to remove the plastic cover that also houses the courtesy light by unscrewing the two fastening screws; once you reach the cabin air filter location, unscrew the four screws that secure the cap and extract the old filter, ensuring there are no dirt residues inside, and insert the new one (the activated carbon version is recommended), orienting it according to the direction of the airflow indicated by the arrows printed on the filter itself.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Volvo S80 (1998-2006 / ) Simple DIY maintenance can save you a significant amount of money. Obtain a pollen filter of the same model as the original. These filters can be eas…
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Volvo S80 (1998-2006 / ) This short video shows how to replace the air filter in the engine bay of the 1999 Volvo S80 T6. First, after opening the bonnet, unclip and detach t…
Instructions for Removing ABS Control Unit
Instructions for Removing ABS Control Unit
Volvo S80 (1998-2006 / ) To access the ABS pump control unit, you need to remove the air filter housing. Disconnect the connector attached to the mass air flow sensor located…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos