Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Volvo S80 - Years 1998-2006
Part: Cabin air filter

Simple DIY maintenance can save you a significant amount of money. Obtain a pollen filter of the same model as the original. These filters can be easily found on various online sales sites. The pollen filter purifies the air in the cabin and is located under the passenger side glove compartment, enclosed in an easily identifiable housing. To access the filter, remove the screws that secure the panel under the glove box. Once the filter cover is removed, take out the filter by pulling it out carefully to avoid dust dispersing. To collect the dirt, place a cloth at the bottom. Reinsert the new filter into its housing and carefully close the cover.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Cabin Air Filter
Replacing Cabin Air Filter
Volvo S80 (1998-2006 / ) The cabin air filter is located on the passenger side, just below the glove compartment, above the scuff plate; to access the air duct, it is necessa…
Replacing the Engine Air Filter
Replacing the Engine Air Filter
Volvo S80 (1998-2006 / ) This short video shows how to replace the air filter in the engine bay of the 1999 Volvo S80 T6. First, after opening the bonnet, unclip and detach t…
Removing and Replacing the ABS Control Unit
Removing and Replacing the ABS Control Unit
Volvo S80 (1998-2006 / ) First disconnect the negative terminal of the battery located in the rear boot, under the mat, on the left rear side (you need to remove the upper fa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos