Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc90
    4. : Where is the battery located in the Volvo XC90?

Volvo Xc90 - Video tutorial

Model: Volvo Xc90 MK 2 - Years 2015-2024
Part: Battery
Operation: Where is the battery located in the Volvo XC90?

In this video, we can see where the battery is located in the Volvo XC90 and how to proceed in case we need to replace it, which is a very simple and quick operation. As shown, the battery is not located in the traditional engine compartment housing, but inside the trunk, specifically underneath the bottom panel. To access it, it will be sufficient to remove this panel, while to remove it, we will need to disconnect both terminals, starting with the negative one, and unscrew the bolt of the lower mounting bracket. To install the replacement, it will be sufficient to follow the reverse procedure.


Posted on 26 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Xc90 2015-2025 - Where is the battery located on the Volvo XC 90? Read Answer
    • Xc90 2015-2025 - Where is the battery in my Volvo XC90? Read Answer
    • Xc90 2002-2014 - Where is the battery of the Volvo CX90 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos