Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo V50?

Model: Volvo V50 MK 1 - Years 2004-2012
Part: Service warning light

On the Volvo V50, the procedure to reset the Service light involves pressing and holding the button located on the right side of the instrument cluster: this button must be held down while the ignition is off. Next, insert the key and turn it to switch on the ignition, continuing to hold the corresponding button: a flashing "i" will appear in the centre of the display. After the icon has flashed three times, you can release the button and then switch off the instrument cluster; you can check the reset of the light by turning the ignition on again.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Volvo V50?
How do you reset the Service light on the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In order to reset the Service light of the Volvo V50, you need to press and hold the TRIP button located on the lower side of the instrument panel wh…
How do you reset the Service light on the Volvo V50?
How do you reset the Service light on the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In order to reset the Service light of the Volvo V50, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
How to Reset the Service Light on a Volvo V50
How to Reset the Service Light on a Volvo V50
Volvo V50 (2004-2012 / MK 1) To reset the Service light on a Volvo V50, press and hold the button located on the right side of the instrument cluster while the cluster is off. Wh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos