Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of a Volvo XC90

Model: Volvo Xc90 MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

Today, we will see, thanks to this useful tutorial, the entire procedure necessary to replace the remote battery of a Volvo XC90, second generation model produced from 2015 onwards. Start by removing the front and back covers of the remote as shown in the video.

Next, using a flathead screwdriver, unscrew the battery cover by turning it counterclockwise. Once done, you can remove the old, exhausted battery and replace it with a new one, then close everything by following the reverse procedure.

The required battery is the CR2032.


Updated on 1 September 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery in a Volvo XC90?
How to Replace the Remote Battery in a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To replace the battery in the Volvo XC90 remote, simply remove the plastic cover located on the back of the remote, opposite the buttons. Once the co…
How to Replace the Remote Battery for the Volvo XC90?
How to Replace the Remote Battery for the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) To replace the battery in the Volvo XC90 remote, lower the side lever to remove the cover on the back of the device. Next, pry off the front cover an…
How to replace the battery of the 2019 Volvo XC90 remote control
How to replace the battery of the 2019 Volvo XC90 remote control
Volvo Xc90 (2015-2026 / MK 2) To replace the battery of the 2019 Volvo XC90 remote control, we need a flathead screwdriver and a CR2032 battery. To replace the battery, we need to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos