Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Oil Change Notification on a Volvo XC70

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

This brief video tutorial shows the entire procedure required to reset the engine oil change notification on a Volvo XC70, a third-generation model produced from 2007 to 2016. Start by inserting the ignition key and pressing the "start" button of the vehicle.

Next, press and hold the button on the right side of the speedometer along with the "start" button.

Once done, the "i" warning light will start to flash. To complete the reset, continue holding both buttons until the light has flashed three times, as shown in the video.

Finally, restart the vehicle to verify the success of the operation.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Volvo XC70
Resetting the Service Light on a Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) Below, we will discover the information related to resetting the service light for routine maintenance of the engine oil change on a Volvo XC70. Firs…
Reset of the service light for the Volvo XC70.
Reset of the service light for the Volvo XC70.
Volvo Xc70 (2007-2016 / MK 3) Below we will see the instructions on how to reset the service light for the regular maintenance of the engine oil change for the Volvo XC70. First, …
Resetting the Service Light on the Volvo XC70 MK2
Resetting the Service Light on the Volvo XC70 MK2
Volvo Xc70 (2000-2007 / MK 2) The activation of the orange triangular light with an exclamation mark in the centre on the instrument panel of the Volvo XC70 warns you that you are…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos