Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : How do you reset the Service light of the Volvo S40?

Volvo S40 - Video tutorial

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Checks and maintenance
Operation: How do you reset the Service light of the Volvo S40?

The Service light of the Volvo S40 is activated by holding down the button located in the central left part of the instrument panel, immediately below the speedometer and to the left of the central display: you will need to keep this button pressed while the instrument panel is turned off. In this way, it will be possible to insert the ignition key into the corresponding slot and turn it to turn on the instrument panel: continuing to hold down the button, it will be possible to wait a few seconds for the light to turn off. At the end of the procedure, it will be possible to turn off the instrument panel.


Posted on 15 March 2024 by ScegliAuto



How to reset the service light on the Volvo S40
Volvo S40 (2004-2012 / MK 2) Today's guide will explain the necessary steps to reset the maintenance service light for the oil change on the Volvo S40. First, get into the car an
How to reset the service light on Volvo S40.
Volvo S40 (2004-2012 / MK 2) If you are wondering how to manually reset the service light on your Volvo S40 Mk2, you are in the right place because below you will find all the ne
How to reset the service light on the 2002 Volvo S40
Volvo S40 (1995-2004 / MK 1) If you have a Volvo S40 Mk1 (year 2002) and you want to find out how to manually reset the service warning light which continues to light up steadily

    Frequently Asked Questions

    • S40 1995-2004 - Why does the Volvo S40 not start? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos