Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Remove the Alfa Romeo 147 steering wheel airbag

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Steering wheel
Operation: Remove the Alfa Romeo 147 steering wheel airbag

Disassembly of the steering wheel airbag on an Alfa Romeo 147, let's see how to proceed. Before disassembling the steering wheel of the car, we disconnect the terminals of the battery power supply. We insert the screwdriver into the slots of the rear of the steering wheel and unscrew the tightening screws that hook the airbag. Once the airbag has been removed, we immediately disconnect the power supply terminals and extract the same from the steering wheel. To reassemble the airbag we connect the power supply terminal, then, we press the same on the steering wheel with our hands. We tighten the airbag tightening screws. We connect the battery power.


Posted on 3 December 2023 by ScegliAuto



How to remove the steering wheel of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) How to remove the steering wheel of an Alfa Romeo 147? Before disassembling the car steering wheel, disconnect the battery terminals in the engine co
How to remove the steering wheel on an Alfa Romeo 147.
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial, we can see how it is possible to replace the steering wheel on an Alfa Romeo 147 by following simple steps: the first thing w
How to remove the steering wheel of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before we can start, we will have to go to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing the rear Allen screws

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos