Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on an Alfa Romeo 147?

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Engine oil

To change the engine oil on the Alfa Romeo 147, open the cap located in the front bonnet so that air pressure helps expel the old oil. Then lift the car on a ramp or axle stands and remove the closure plug from the oil sump. If necessary, you can use a penetrating spray. Allow the engine oil to drain into a container while removing the filter located right next to the sump. You can also use lubricant if needed. Install the new filter and close the oil sump that should now be completely drained. Finally, lower the car and pour in the new engine oil.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Alfa Romeo 147 (2000-2010 / MK 1) Today, we will go through the steps to replace the engine oil and oil filter on an Alfa Romeo 147 with a 1.9 JTD engine. First, open the bonnet of yo…
Oil and Oil Filter Replacement on Alfa Romeo JTD 147 / GT
Oil and Oil Filter Replacement on Alfa Romeo JTD 147 / GT
Alfa Romeo 147 (2000-2010 / MK 1) To replace the engine oil and oil filter on an Alfa Romeo 147, first open the bonnet after ensuring the vehicle is on a flat surface or on a ramp for…
Oil and Filter Change on an Alfa Romeo 147
Oil and Filter Change on an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) How to replace the engine oil and filter on an Alfa Romeo 147? Follow this guide to proceed with the replacement: open the car door and pull up the e…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos