Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Filter Change on an Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Oil filter

Video tutorial

How to replace the engine oil and filter on an Alfa Romeo 147? Follow this guide to proceed with the replacement: open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Unscrew the cap on top of the engine head; lift the car on a column lift and unscrew the bolt of the oil sump (let the oil drain into a container).

Using a socket wrench, unscrew the oil filter, remove it and position a new one, ensuring it fits snugly around the thread.

Lower the car to the ground. Remove the cap on the engine head and top up with new oil.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter on an Alfa Romeo 147?
How to Change the Engine Oil and Filter on an Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) To change the engine oil on the Alfa Romeo 147, open the cap located in the front bonnet so that air pressure helps expel the old oil. Then lift the …
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Engine Oil and Oil Filter Replacement on an Alfa Romeo 147 JTD
Alfa Romeo 147 (2000-2010 / MK 1) Today, we will go through the steps to replace the engine oil and oil filter on an Alfa Romeo 147 with a 1.9 JTD engine. First, open the bonnet of yo…
Oil and Oil Filter Replacement on Alfa Romeo JTD 147 / GT
Oil and Oil Filter Replacement on Alfa Romeo JTD 147 / GT
Alfa Romeo 147 (2000-2010 / MK 1) To replace the engine oil and oil filter on an Alfa Romeo 147, first open the bonnet after ensuring the vehicle is on a flat surface or on a ramp for…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos