Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator on an Alfa Romeo 166?

Model: Alfa Romeo 166 MK 1 - Years 1998-2007
Part: Heater core

To replace the heating radiator on an Alfa Romeo 166, open the bonnet to access the engine compartment directly under the windscreen. In the central area, you will find a panel that needs to be removed. By removing this panel, you can locate the cabin heating radiator, which can be taken out by unscrewing the screws that secure it in place and disconnecting the pipes. This will allow you to insert the new radiator, refitting all the components removed earlier.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gearbox Oil on the Alfa Romeo 166?
How to Replace the Gearbox Oil on the Alfa Romeo 166?
Alfa Romeo 166 (1998-2007 / MK 1) To replace the gearbox oil on the Alfa Romeo 166, lift the car to access the components underneath the engine bay. Here, you will locate the gearbox …
How to Remove the Door Panel of an Alfa Romeo 166
How to Remove the Door Panel of an Alfa Romeo 166
Alfa Romeo 166 (1998-2007 / MK 1) Before you begin, open the door of your Alfa Romeo 166. Start by prising out and removing the inserts of the door panel using a thin but sturdy tool.…
How do you replace the steering wheel of the Alfa Romeo 166?
How do you replace the steering wheel of the Alfa Romeo 166?
Alfa Romeo 166 (1998-2007 / MK 1) To replace the steering wheel of the Alfa Romeo 166, you will need to insert screwdrivers into the holes located at the back of the steering wheel, i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos