Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Additional Chip Tuning Control Unit for Diesel Performance

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Control unit

For this operation, obtain the control unit kit for the vehicle in question. Remove the oil cap and take off the upper engine cover. Refit the oil cap to prevent dirt from accidentally entering. Remove the connector from the installed control unit and, after connecting the new additional control unit to the supplied cable, connect one end of this cable to the control unit connector and the other end to the connector that was going to the installed control unit. Position the new control unit in a suitable location and secure it with plastic ties. Refit the engine cover.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Handle of an Alfa Romeo 147
How to Remove the External Handle of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this video, briefly learn how to remove and install the external handle on the door of an Alfa Romeo 147. Insert the screwdriver into the gap on t…
How to Replace the Intercooler Hose on an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Remove the engine soundproofing panel. Take off the right cover of the hose (as shown in the video) and unscrew the metal clamp around the intake hos…
How to Remove the External Handle with Lock of an Alfa Romeo 147
How to Remove the External Handle with Lock of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Learn how to remove the external handle with lock (located on the door) of an Alfa 147. Insert a metal key into the slot on the door (side panel), us…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos